D26.50-0081-09
1 Needle bearing
2 Synchronizer cone
3 Inner synchronizer ring
4 Locking ring
5 Shift sleeve
6 Sliding block
7 Ball
8 Compression spring
9 Synchronizer body
10 Synchronizer cone
11 3rd gear wheel
12 Needle bearing
13 Locking ring
14 Thrust washer
15 2nd gear wheel
31 Main shaft
32 Needle bearing
33 Reverse gear wheel
34 Thrust washer
35 Shift sleeve
36 Sliding block
37 Ball
38 Compression spring
39 Synchronizer body
40 Locking ring
41 Synchronizer cone
42 Needle bearing
43 5th gear wheel
44 Thrust washer
45 Snap ring
46 Synchronizer cone
16 Needle bearing
17 Locking ring
18 Synchronizer cone
19 Inner synchronizer ring
20 Synchronizer cone
21 Shift sleeve
22 Ball
23 Compression spring
24 Sliding block
25 Synchronizer body
26 Synchronizer cone
27 Inner synchronizer ring
28 Synchronizer cone
29 lst gear wheel
30 Needle bearing
| Removal | ||
1 | Remove main shaft and countershaft | ||
| Disassembling | ||
2 | Disassemble main shaft | Synchronizer cones, inner synchronizer rings and synchronizer bodies must not be interchanged. Pay attention to allocation, danger of parts being mixed up. | |
| Measuring | ||
3 | Check wear limits of inner synchronizer rings | ||
| Checking | ||
4 | Check all parts for wear | ||
| Assembling | ||
5 | Assemble main shaft | Synchronizer cones, inner synchronizer rings and synchronizer bodies must not be interchanged. Pay attention to allocation, danger of parts being mixed up. | |
| Installation | ||
6 | Install main shaft and counter shaft |