AR26.45-W-0067-01A | Remove oil pipe from power take-off housing, install | ||
| Notes on self-locking nuts and bolts |
PTO
Number | Designation | Transmission | Transmission | |||
BA26.45-N-1007-01H | Screw plug to housing | M10 | Nm | 10 | 10 | |
M22 | Nm | 30 | 30 | |||
M38 | Nm | 60 | 60 | |||
Repair materials
Number | Designation | Order number |
BR00.45-Z-1008-02A | Quick-acting adhesive, Loctite 270 | A 002 989 93 71 |
BR00.45-Z-1027-06A | Synthetic grease 50 g | A 001 989 32 51 10 |
W26.45-1145-01
Remove
1 Unscrew screw plug (58) and remove sealing ring.
W26.45-1146-01
2 Remove core hole cover (65) from housing (36).
3 Unscrew stud (64).
4 Remove oil pipe (63).
W26.45-1147-01
5 Unscrew bolts (arrows) and take the oil pipes (61, 62) out of the housing (36).
W26.45-1147-01
Install
6 Insert oil pipes (61, 62) in the housing (36) with clamps.
Coat the ends of the oil pipes (61, 62, ) with lubricant.
7 Insert new bolts (arrows) in the clamps but do not tighten yet.
It must be possible to move the oil pipes (61, 62) in the housing (36).
W26.45-1148-01
8 Mount the housing cover (1) on the housing (36) and center the oil pipes (61, 62).
9 Remove housing cover (1).
10 Tighten bolts for the oil pipes (61, 62).
Check installation position of oil pipes (61, 62) after tightening the bolts.
W26.45-1146-01
11 Insert oil pipe (63) in the housing (36) and tighten with the stud (64).
Secure stud bolt (64) with locking agent.
Machined side of oil pipe (63) must face upwards and the stud bolt (64) must engage in hole in the oil pipe (63).
12 Coat new core hole cover (65) with locking agent and install in housing (36) until flush using a suitable drift.
W26.45-1145-01
13 Screw in screw plug (58) with new seal .