1 | Install differential (21). |
S26.40-4554-11
2 | Install long countershaft (18) together with main shaft (19) and shift fork (20). |
S26.40-4552-11
3 | Install short countershaft (17). |
4 | Install selector lever (15) with bolts (16) . |
S26.40-4551-11
5 | Install shift axle (12) with sliding sleeve (13) of reverse gear and shift fork (14) of third and fourth gear together. |
S26.40-4550-11
6 | Install shift unit (10). |
Check spring (11) is correctly seated. |
7 | Install washer (9). |
S26.40-4549-11
S26.40-4553-09
8 | Apply sealant in the form of a bead on transmission housing rear section (7). |
9 | Attach rear section of transmission housing (7). |
Insert the shift finger of the shift arm (6) into the shift unit (10) (arrow) and swing the shift arm (6) downwards. |
10 | Screw-in bolts connecting front section of transmission housing (8) to rear section of transmission housing (7). |
Do not yet tighten bolts connecting front section of transmission housing (8) to rear section of transmission housing (7) to torque. |
11 | Tighten opposing bolts connecting front section of transmission housing (8) to rear section of transmission housing (7) to 1st stage torque. . |
12 | Shift transmission through all gears and check for ease of movement. |
Move the shift arm (6) and shift unit (10) to the corresponding shift positions. |
13 | Tighten all bolts connecting front section of transmission housing (8) to rear section of transmission housing (7) to 2nd stage torque in clockwise direction. . |
14 | Install shift arm (5). |
To do so, install cotter pin. |
15 | Fasten bracket (3) for shift cables using bolts (4) . |
16 | Mount reversing rod (2) onto ball head of shift arm (6). |
17 | Mount reversing rod (1) onto ball head of shift arm (5). |
S26.40-4547-11