Disassembling and assembling inner bearing cover

AR26.30-G-6519OHA

Disassembling and assembling inner bearing cover

28.11.2016

Transmission

714.140/143 in model 000.001

Transmission with "control cable" gearshift

1

Needle roller bearing

3

Inner bearing cap

4

Screw

5

Spring washer

6

Sleeve

7

Oil strainer

8

Fitting



Disassemble

1

Disassemble gearshift system

AR26.60-G-6515OHA

2

Clamp inner bearing cap (3) in a vise

 Use aluminum soft vise jaws.

3

Remove needle bearing (1) from inner bearing cap (3) using a drift

 Drift

*385589001500

4

Remove screw (4) and remove sleeve (6), oil screen (7) and fitting (8) in succession from inner bearing cap (3)



Clean

5

Clean all parts



Check

6

Check all components for wear and condition

If there are problems



Replace affected component.



Assemble

7

Insert fitting (8), oil screen (7), sleeve (6) and a new spring washer (5) into inner bearing cap (3)

8

Tighten bolt (4)

 Screw/bolt, breather to inner bearing cap

*BA26.30-N-1009-01G

9

Install needle bearing (1) in inner bearing cap (3) using a drift

 Drift

*385589001500

10

Unclamp inner bearing cap (3) from vise

11

Assemble gearshift system

AR26.60-G-6515OHA

 Cover

Number

Designation

Transmission 714.140/143

BA26.30-N-1009-01G

Screw/bolt, breather to inner bearing cap

Nm

20