AR26.20-W-2000KA | Remove/install gear control (GS) control unit | 9.3.10 |
TRANSMISSION 715.350 /370 /380 /515 /525 with CODE (GE3) Mercedes PowerShift
TRANSMISSION 715.350 /370 /380 with CODE (GE7) Mercedes PowerShift 2
W26.20-1099-09
1 Housing
2 O-ring
3 O-ring
4 Gasket
5 Intermediate plate
Y33 Gate 1 solenoid valve (MG1)
Y34 Gate 2 solenoid valve (MG2)
Y125 Countershaft brake solenoid valve
6 Gasket
A16 Gear control (GS II) control unit
Y29 Splitter 1 solenoid valve (MS1)
Y30 Splitter 2 solenoid valve (MS2)
| Remove/install | ||
1 | Remove gate module | ||
2 | Detach gear control (GS) control unit (A16) from housing (1) | Installation: Install new gasket (4) and coat with synthetic grease. | |
| |||
3 | Remove countershaft brake solenoid valve (Y125), splitter 1 solenoid valve (MS1) (Y29), splitter 2 solenoid valve (MS2) (Y30), gate 1 solenoid valve (MG1) (Y33) and gate 2 solenoid valve (MG2) (Y34) | Installation: Replace the O-rings (3) and coat with synthetic grease. | |
4 | Detach intermediate plate (5) from gear control (GS) control unit (A16) | Installation: Replace O-ring (2) and seal (6) and coat with synthetic grease. | |
| |||
5 | Install in the reverse order | ||
6 | Teach in gear control (GS) control unit |
Shift gate module
Number | Designation | Transmission | Transmissions | Transmission 715.515/525 | ||
BA26.20-N-1001-03KL | Bolt, control unit to intermediate plate | Nm | 10 | 10 | 10 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1027-06A | Synthetic grease 50 g | A 001 989 32 51 10 |