AR26.20-W-1005KA | Remove/install gate module | 12.4.10 |
TRANSMISSION 715.350 /370 /380 /515 /525 with CODE (GE3) Mercedes PowerShift
TRANSMISSION 715.350 /370 /380 with CODE (GE7) Mercedes PowerShift 2
W26.20-1202-06
Shown on transmission 715.515 with CODE (GE3) Mercedes PowerShift
1 Compressed-air line
2 Compressed-air line
3 Electrical connector
4 Electrical connector
A90 Gate module
| Remove/install | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
1 | Tilt cab | When tilting, the maintenance flap must always be open. | |
| Notes on tilting the cab | ||
2 | Unpressurized circuit 4 of compressed-air system | ||
3 | Disconnect electrical connectors (3, 4) from gate module (A90). | ||
4 | Detach compressed-air lines (1, 2) at gate module (A90) | With compressed air connector system "VOSS 230". | |
5 | Detach gate module (A90). | Installation: Replace O-rings and insert gate module (A90) with sealant. | |
| |||
6 | Install in the reverse order | ||
7 | Teach in gear control (GS) control unit |
Shift gate module
Number | Designation | Transmission | Transmissions | Transmission 715.515/525 | ||
BA26.20-N-1002-03KL | Bolt, shift gate module to transmission | Nm | 25 | 25 | 25 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1015-01A | Loctite 5203 sealant | A 002 989 71 20 10 |