Remove/install gate module

AR26.20-W-1005A

12.4.10

TRANSMISSION 715.500 in MODEL 930, 932, 933, 934 with CODE (GS7) Gear control II

TRANSMISSION 715.507 in MODEL 930, 932, 934 with CODE (GS7) Gear control II

TRANSMISSION 715.510 in MODEL 930, 934 with CODE (GS7) Gear control II

TRANSMISSION 715.513 in MODEL 930, 934 with CODE (GS7) Gear control II

TRANSMISSION 715.520 in MODEL 930, 932, 933, 934 with CODE (GS7) Gear control II

TRANSMISSION 715.540 in MODEL 930, 932, 934 with CODE (GS7) Gear control II

W26.20-1066-06

1 Compressed-air line

3 Electrical connector

4 Electrical connector

A90 Gate module

Modification notes

24.8.07

Teach in gear control (GS) control unit, added.

Operation step 7

 	Remove/install
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.	AS60.80-Z-0001-01A
1	Tilt cab	 The maintenance flap must always be open when tilting.
	Notes on tilting the cab		AH60.80-N-0003-01A
2	Unpressurized circuit 4 of compressed-air system
3	Disconnect electrical connectors (3, 4) from gate module (A90).
4	Detach compressed-air line (1) from gate module (A90).	With compressed-air connection system "VOSS 230"	AR42.10-W-0900A
		With compressed-air connection system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6)	AR42.10-W-0900C
5	Detach gate module (A90).	 Installation: Replace O-rings and insert shift cylinder with sealant.	*BR00.45-Z-1015-01A
			*BA26.20-N-1002-03A
6	Install in the reverse order
7	Teach in gear control (GS) control unit		AR54.21-W-0009A

 Shift gate module

Number	Designation		Transmission 715.500/507/510/ 513/520/540 with code GS7


BA26.20-N-1002-03A	Bolt, shift gate module to transmission	Nm	25

Repair materials

Number	Designation	Order number
BR00.45-Z-1015-01A	Loctite 5203 sealant	A 002 989 71 20 10