AR26.19-W-0009B | Remove/install gate solenoid valve | 18.9.02 |
TRANSMISSION 715.500 /507 /510 /513 /520 /540 with CODE (GS7) Gear control II
W26.19-1063-09
1 Gate cylinder
2 Sealing ring
3 Seal
4 Sealing ring
5 Valve seat
Y29 Splitter 1 solenoid valve (MS1)
Y30 Splitter 2 solenoid valve (MS2)
Y33 Gate 1 solenoid valve (MG1)
Y34 Gate 2 solenoid valve (MG2)
6 Sealing ring
7 Intermediate plate
8 Seal
A16 Gear control (GS) control unit
| Remove/Install | ||
1 | Remove gate module | ||
2 | Detach gear control (GS) control unit (A16) from gate cylinder (1) | Installation: Install new seal (3). | |
| |||
3 | Remove gate 1 solenoid valve (MG1) (Y33) and gate 2 solenoid valve (MG2) (Y34) | Installation: Install new sealing rings (6). | |
4 | Remove splitter 1 solenoid valve (MS1) (Y29) and splitter 2 solenoid valve (MS2) (Y30) | Installation: Install new sealing rings (6). | |
5 | Remove valve seats (5) | Installation: Install new sealing rings (4). | |
| |||
6 | Detach intermediate plate (7) from gear control (GS) control unit (A16) | Installation: Install new sealing ring (2) and seal (8). | |
| |||
7 | Install in the reverse order |
Shift gate module
Number | Designation | Transmission | ||
BA26.20-N-1001-03A | Bolt, control unit to intermediate plate | Nm | 10 | |
Pliers
442 589 00 37 00