AR26.18-W-2101B | Disassembling and assembling gate shift cylinder | 9.3.10 |
TRANSMISSION 715.350 /370 /380 /515 /525 with CODE (GE3) Mercedes PowerShift
TRANSMISSION 715.350 /370 /380 with CODE (GE7) Mercedes PowerShift 2
TRANSMISSION 715.500 /507 /510 /513 /520 /540 with CODE (GS7) Gear control II
W26.18-1002-06
1 Housing
2 Sealing ring
3 Shift piston
4 Rubber sealing ring
| Disassemble/assemble | ||
1 | Remove gear control (GS) control unit | Transmission 715.350/370/380/515/525 | |
Transmission 715.500/507/510/513/520/540 | |||
2 | Pull shift piston (3) out of the housing (1) | ||
3 | Detach rubber sealing ring (4) from shift piston (3) | Installation: Install new rubber sealing ring (4) with synthetic grease. | |
4 | Remove sealing ring (2) from the housing (1) | Installation: Install new sealing ring (2) flush with the housing (1) and pack the space behind the sealing lip with synthetic grease. | |
5 | Assemble in the reverse order |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1027-06A | Synthetic grease 50 g | A 001 989 32 51 10 |