Remove/install gear control valve

AR26.18-W-2050A

6.2.09

TRANSMISSION 715.320 in MODEL 375.3

TRANSMISSION 715.320 in MODEL 970, 972, 974, 976

W26.18-0026-05

1 Control valve

2 Locknut

3 Shift rod

4 Gate support

5 Nut

6 Compressed-air line

7 Compressed-air line

8 Compressed-air line

9 Nut

Modification notes

30.3.00	Value changed from 45 Nm to 25 Nm	Value modified in BA26.60-N-1002-01F with transmission 715.320	*BA26.60-N-1002-01F
30.3.00	Value changed from 120 Nm to 160 Nm	Value modified in BA26.60-N-1003-01F with transmission 715.320	*BA26.60-N-1003-01F
10.4.00	Value changed from 160 Nm to 150 Nm	Value modified in BA26.60-N-1003-01F with transmission 715.320	*BA26.60-N-1003-01F

 	Remove/install
1	Remove lock nut (2) on control valve (1)		*BA26.60-N-1003-01F
		 Installation: Adjust shift mechanism: 
		Left-hand drive vehicles	AR26.60-W-6420C
		Right-hand drive vehicles	AR26.60-W-6420G
2	Remove shift gate support (4) on shift rod (3)		*BA26.60-N-1002-01F
3	Remove compressed-air lines (6, 7, 8) on control valve (1)	 Installation: Replace sealing rings.
			*BA26.60-N-1005-01F
4	Unscrew nut (9), press control valve (1) out of cone in shift lever	 Use a suitable puller if necessary.
			*BA26.60-N-1001-01F
5	Install in the reverse order

 Shift mechanism

Number	Designation			Transmission 715.320/321


BA26.60-N-1001-01F	Control valve to shift shaft		Nm	45
BA26.60-N-1002-01F	Shift gate support to shift rod/bracket		Nm	25
BA26.60-N-1003-01F	Lock nut, control valve to shift rod		Nm	150
BA26.60-N-1005-01F	Pressure line to control valve / gear shift cylinder	M10	Nm	20
		M12	Nm	30