Remove/install oil feed flange

AR25.40-W-0525A

12.4.10

MODEL 950, 952, 953, 954 with ENGINE 541.9 with CODE (G02) Torque converter clutch (TCC)

MODEL 950, 952, 954 with ENGINE 542.9 with CODE (G02) Torque converter clutch (TCC)

W25.40-1031-06

1 Oil feed flange

2 O-ring

3 Bearing outer race

4 Piston ring

 	Remove/install
1	Remove torque converter clutch		AR25.40-W-0100A
2	Remove torque converter of torque converter clutch		AR25.40-W-0400A
3	Detach retarder from torque converter housing		AR25.40-W-0520A
4	Remove oil feed flange (1)	 Installation: Coat contact surfaces of oil feed flange (1) with sealing compound.	*BR00.45-Z-1009-01A
			*BA25.40-N-1018-01C
5	Remove O-ring (2) at oil feed flange (1)	 Installation: Replace and grease the O-ring (2).
6	Inspect piston ring (4) for wear, replace if necessary.
7	Check bearing outer race (3) of tapered roller bearing for wear	 Check bearing outer race (3) in oil feed flange and bearing inner race on rotor of retarder for wear, replace entire tapered roller bearing if necessary.
 Danger!	Risk of injury to skin and eyes caused by handling hot or glowing objects.	Wear safety gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
8	Remove bearing outer race (3) of tapered roller bearing from oil feed flange (1)	 Only if worn.
		 Installation: Heat oil feed flange to approx. 100 °C and press in bearing outer race (3) all the way with drift.
			*625589021500
		Heating plate
9	Install in the reverse order

 Torque converter clutch (WSK)

Number	Designation		Engine 541.9, 542.9 with code G02


BA25.40-N-1018-01C	Bolt, oil supply flange to torque converter clutch	Nm	45

Drift

625 589 02 15 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1009-01A	Sealing compound Loctite 574, 50 ml	A 001 989 89 20 10