S25.20-4519-09
Shown on model 470 |
1 | Hydraulic hose line | 3 | Clamp plate | 5 | Banjo bolt | ||
2 | Hydraulic line | 4 | Clutch slave cylinder | 6 | Sealing rings |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Notes on working on clutch operating system | ||
Topical note | Brake fluid notes | ||
Topical note | Notes on working on hydraulic hoses | ||
| Remove/install | ||
1 | Remove rear and center lower engine compartment lining. | ||
Installation: Install rear and center lower engine compartment lining only after ventilation of clutch operation system. | |||
| Clean | ||
2 | Clean hose connection of hydraulic hose line (1) on hydraulic line (2). | Assembly cleaner | |
3 | Remove hydraulic line (2) from hydraulic hose line (1). | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
Catch escaping brake fluid and seal connections. | |||
Commercially available devices/tools | |||
Union nut, hydraulic line to hydraulic hose | |||
Record plug | |||
4 | Remove clamping plate (3). | ||
| Clean | ||
5 | Clean hose connection of hydraulic hose line (1) at clutch slave cylinder (4). | Assembly cleaner | |
6 | Remove hydraulic hose line (1). | To do this, remove banjo bolt (5). Catch escaping brake fluid and seal connections. | |
Commercially available devices/tools | |||
Installation: Replace seals (6). | |||
Banjo bolt, hydraulic hose to clutch slave cylinder | |||
Record plug | |||
7 | Install in the reverse order. | ||
8 | Bleed clutch actuation system. |
129 589 00 91 00
Record plug