AR25.20-P-0100AK | Remove/install master cylinder | 19.7.07 |
MODEL 169.0 /3, 245 with TRANSMISSION 716, 711
P25.20-2035-09
Shown with remove brake booster
4 Hydraulic line
5 Brake fluid reservoir
1 Clutch master cylinder
2 Connector hose
3 Fuse
P25.20-2037-09
1 Clutch master cylinder
6 Clutch pedal
8 Pin
7 Pedal bearing bracket
| Remove/install | ||
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Brake fluid notes | ||
1 | Remove windshield washer fluid reservoir | ||
2 | Extract brake fluid from brake fluid reservoir (5) | ||
3 | Detach connector hose (2) on brake fluid reservoir (5) | Installation: Check sealing ring of connector hose (2), replace if necessary. | |
4 | Release locking device (3) using suitable tool on clutch master cylinder (1) | Do not remove locking device (3). | |
5 | Withdraw hydraulic line (4) from clutch master cylinder (1) | ||
6 | Remove retainer pin (8) on clutch pedal (6) | Installation: Check retainer pin (8), replace if necessary. | |
7 | Use suitable tool to turn clutch master cylinder (1) to left and undo from guide in pedal bracket (7) | ||
8 | Remove clutch master cylinder (1) through the engine compartment | ||
9 | Detach connector hose (2) from clutch master cylinder (1) | Only when installing new clutch master cylinder (1). | |
Installation: Check sealing ring of connector hose (2), replace if necessary. | |||
10 | Install in the reverse order | ||
11 | Bleed clutch operating system | ||
12 | Check clutch master cylinder (1) for signs of leaks |