P20.30-2589-08
Shown on model 177 with engine 282 |
1 | Coolant expansion reservoir | 3 | Coolant lines | |
2 | Electrical connector | 4 | Catch tabs |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on coolant | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Slowly unscrew the cap for the coolant expansion reservoir (1) and reduce the overpressure. | ||
2 | Suction off the coolant from the coolant expansion reservoir (1) and collect it in a suitable container. | Hand pump | |
3 | Release and disconnect the electrical connection (2) on the coolant expansion reservoir (1) and detach the electrical wiring harness on the coolant expansion reservoir (1). | Dismantling tool | |
4 | Release and disconnect the coolant lines (3) and seal using suitable protective covers / stop plugs. | Record plug | |
Set of protective caps | |||
5 | Detach and remove the coolant expansion reservoir (1) at the catch tabs (4). | ||
6 | Install in the reverse order. | ||
| Check | ||
7 | Check and, if necessary, correct the coolant level. |
000 589 95 63 00
Dismantling tool
210 589 00 71 00
Hand pump
001 589 00 91 00
Set of protective caps
129 589 00 91 00
Record plug