P20.20-A002-09
6 | Screw | 7 | Radiator |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Danger | Risk of explosion caused by escaping hydrogen or overheating of the fuel tanks when working on the hydrogen system. Risk of frostbite to body parts caused by escaping gas and by touching component parts carrying gas when emptying fuel tanks. Risk of asphyxiation caused by inhalation of air diluted by hydrogen. Risk of burn injuries by coming into contact with an invisible pale blue hydrogen flame. | ||
Topical note | Notes on fuel cell coolant | ||
Topical note | Notes on fuel cell system | ||
| Remove/install | ||
1 | Ensure that the requirements for driving into the workshop are fulfilled. | ||
Topical note | Requirements for driving into the workshop | ||
2 | Print out "tank system, fuel cell, form event log," fill out, and attach to the vehicle somewhere clearly visible. | ||
| |||
3 | Drain off coolant. | ||
4 | Remove fan unit. | ||
5 | Unclip air duct segment and top radiator grille from the cooler (7). | Dismantling tool | |
6 | Remove remaining bottom right coolant hose. | ||
7 | Remove screw/bolts (6). | Screw, cooler to supporting frame | |
8 | Unhook cooler (7) from the retaining frame and remove downward. | Helper required. | |
9 | Install in the reverse order. |
000 589 95 63 00
Dismantling tool