5 | Thermostat housing cover |
6 | Screws |
7 | Coolant thermostat |
8 | Seal ring |
G20.10-3109-05
| Remove/install | ||
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
1 | Drain and collect the coolant | ||
Notes on coolant | . | ||
2 | Remove the coolant hose from the thermostat housing cover (5) | ||
3 | Remove the thermostat housing cover (5) | Remove the bolts (6). | |
Install: Install new sealing rings (8). | |||
4 | Remove the coolant thermostat (7) | Install: Note the mounting position of the coolant thermostat (7). | |
5 | Check the coolant thermostat (7) | ||
6 | Install in reverse order | ||
7 | Check the coolant level, if necessary, correct the level | ||
8 | Check cooling system for leakages |