1 | Bolts |
2 | Electrical connector |
B40 | Oil sensor (oil level, temperature and quality) |
P18.40-2485-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Drain engine oil | ||
| |||
Installation: Do not install lower center engine compartment lining until after leak test. | |||
2 | Release and disconnect electrical connection (2) | ||
3 | Unscrew screws/bolts (1) and remove oil sensor (oil level, temperature and quality) (B40) downwards | Bolt, fill level sensor to oil pan | |
4 | Install in the reverse order | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
5 | Perform an engine test run and check engine for proper operation and leaktightness | ||
6 | Install lower center engine compartment lining |