1 | Heat exchanger |
2 | Bolts |
3 | Hose |
4 | Hose |
S18.30-4509-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
| Remove/install | ||
1 | Remove charge air pipe on throttle valve actuator | ||
2 | Remove power steering pump | ||
3 | Remove hoses (3, 4) from heat exchanger (1) | Hose clamp pliers | |
4 | Remove heat exchanger (1) | To do this, remove screws (2). | |
Installation: Replace seals and sealing rings. | |||
Screw/bolt, heat exchanger to retaining plate | |||
| Clean | ||
5 | Clean sealing surfaces at heat exchanger (1) and at retaining plate | | |
Loctite 7063 (400 ml) cleaning spray | |||
6 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Check for leak tightness with engine running | Visual inspection only. |
003 589 03 37 00
Hose clamp pliers