AR15.40-W-5710A | Remove/install alternator belt pulley | 23.4.08 |
ENGINES 904.9 in MODELS 673, 674, 676
ENGINES 904.9## ## up to 190707 in MODELS 375, 970, 972, 975, 976
ENGINES 906.9## ## up to 190707 in MODELS 970, 972, 974, 975, 976
ENGINES 906.9## ## up to 190707 in MODEL 375, 950, 952, 953, 954, 957
W15.40-0006-06
Shown on engine 904.905
1 Poly-V-belt
2 Nut
3 Belt pulley
4 Fan wheel
G2 Generator
| Remove/install | ||
1 | Switch off ignition | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
2 | Tilt cab | For model 957 open the maintenance flap. | |
| Notes on tilting the cab | ||
3 | Remove right soundproofing on frame | ||
4 | Remove charge air pipe | Not for model 673, 674, 676 | |
Vehicles without code (MS8) Natural gas engine | |||
Vehicles with code (MS8) Natural gas engine | |||
5 | Slacken nut (2) on belt pulley (3) | Counterhold the alternator shaft with Allen wrench. | |
| |||
6 | Slacken poly-V belt (1) and remove from belt pulley (3) | Do not remove poly-V-belt (1). | |
Engine 904.9, Engine 906.9 except model 957 | |||
Engine 906.9 in model 957 | |||
7 | Unscrew nut (2) on belt pulley (3) | Counterhold the alternator shaft with Allen wrench. | |
Installation: Do not tighten nut (2) yet. | |||
8 | Detach belt pulley (3) and fan wheel (4) from alternator (G2) | ||
9 | Install in the reverse order |
Alternator