1 | Exhaust gas recirculation line |
2 | Screw |
3 | Clip |
4 | Bolts |
S14.20-4568-80
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove the transmission with torque converter. | ||
2 | Remove screw (2) and remove clamp (3). | Clamp, EGR line to exhaust collector pipe | |
3 | Unscrew screw/bolts (4). | Bolt, exhaust gas recirculation line to exhaust gas recirculation positioner | |
4 | Remove exhaust gas recirculation line (1). | Installation: Replace screws (2, 4), seals, and clamp (3). | |
5 | Seal openings with suitable protective covers. | Set of protective caps | |
6 | Install in the reverse order. | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Perform engine test run and check engine for leaks in area of exhaust gas recirculation line (1). |
001 589 02 91 00
Set of protective caps