1 | Poly-V belt |
2 | Single tensioning device |
3 | Carrier |
Pfeil | Pin |
W13.25-1018-12
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
Topical note | Notes on tilting the cab | ||
| Remove/install | ||
1 | Tilt cab | ||
2 | Remove soundproofing | ||
3 | Slacken poly-V belt (1) and remove from single tensioning device (2) | ||
| Damage profiles for a poly-V belt | ||
Routing diagram for belt drive | |||
Installation: Check condition of poly-V belt (1); replace if necessary. | |||
4 | Remove single tensioning device (2) from carrier (3) | Installation: The pin (arrow) on the single tensioning device (2) must engage in the bore on the carrier (3).. | |
Bolt, clamping device to carrier | |||
5 | Install in the reverse order |