AR09.41-W-8681C | Removing/installing charge air manifold | 18.1.06 |
ENGINE 904.9 in MODEL 374, 375, 958, 970, 972, 975, 976
ENGINE 906.9 in MODEL 374, 958, 970, 972, 974, 975, 976
ENGINE 906.9 in MODEL 374, 375, 950, 952, 953, 954, 958
ENGINE 906.9 in MODEL 957 except CODE (MS8) Natural gas engine
W09.41-0016-06
Shown on engine 904.9
1 Engine wiring harness
2 Cover
3 Bolt
4 Charge air manifold
5 Clip
6 Charge air pipe
7 Seals
| Remove/install | ||
1 | Remove cylinder head cover | ||
2 | Remove charge air pipe (6) at charge air manifold (4) | ||
3 | Take off cover (2) at charge air manifold (4) | ||
4 | Detach engine wiring harness (1) combination sensor | ||
5 | Remove charge air manifold (4) from cylinder head | Installation: Clean sealing surfaces. Replace gaskets (7). | |
| |||
6 | Remove boost pressure and charge air temperature combination sensor | Only when replacing the charge air manifold (4). | |
7 | Install in the reverse order |
Charge air pipe/charge air cooling