AR09.41-W-2007R | Remove/install boost pressure/charge air temperature sensor | 28.1.09 |
ENGINES 926.9 in MODEL 949
W09.41-1054-06
1 Charge air manifold
2 Electrical connector
3 Sealing ring
B111 Charge air temperature and boost pressure combination sensor
| Remove/install | ||
1 | Switch off ignition | ||
2 | Open engine hood and raise to vertical position | ||
3 | Disconnect electrical connector (2) on charge air temperature and boost pressure combination sensor (B111) | ||
4 | Remove charge air temperature and boost pressure combination sensor (B111) | Installation: Clean sealing surfaces on charge air manifold (1). Replace compression ring (3). | |
| |||
5 | Install in the reverse order |
Charge air pipe/charge air cooling