ar0941w2007r

Remove/install boost pressure/charge air temperature sensor

Type ar · topic 09.41 · version 0100 · 2009-02-18

Applies to: ENGINES 926.9 in MODEL 949

Where it sits

Function group 1 Engine › 09 Air intake, turbocharging › 09.41 Charge air pipe/charge air cooling — Series 949

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.12 Sensor/switch/wiring harness — Series 949

Also applies to engines/gearboxes: 926 9**

AR09.41-W-2007R

Remove/install boost pressure/charge air temperature sensor

28.1.09

ENGINES 926.9 in MODEL 949

Remove/install boost pressure/charge air temperature sensor

W09.41-1054-06

1 Charge air manifold

2 Electrical connector

3 Sealing ring

B111 Charge air temperature and boost pressure combination sensor

Remove/install

1

Switch off ignition

2

Open engine hood and raise to vertical position

AR88.40-W-1000R

3

Disconnect electrical connector (2) on charge air temperature and boost pressure combination sensor (B111)

4

Remove charge air temperature and boost pressure combination sensor (B111)

Installation: Clean sealing surfaces on charge air manifold (1). Replace compression ring (3).

*BA09.41-N-1008-01B

5

Install in the reverse order

Charge air pipe/charge air cooling

Number

Designation

Engine
926.9
in model 949.0

BA09.41-N-1008-01B

Bolt, charge air temperature and charge pressure combination sensor to charge air manifold

Nm

10

Referenced documents