Remove/install boost pressure/charge air temperature sensor

AR09.41-W-2007J

3.11.11

ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5

ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine

ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976

ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976

ENGINES 925.9 in MODELS 970, 972, 974

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

ENGINES 926.9 in MODEL 958.0

W09.41-1038-08

Shown on engine 900.9 with code (MS4) BlueTec 4

1 Electrical connector

2 Cap

B111 Charge air temperature and boost pressure combination sensor

3 Charge air manifold

 	Remove/install
1	Switch off ignition
 Danger!	Risk of injury caused by body parts being pinched or crushed as cab is tilted	Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.	AS60.80-Z-0001-01A
2	Tilt cab
	Notes on tilting the cab		AH60.80-N-0003-01A
3	Take off cover (2) at charge air manifold (3)
4	Disconnect electrical connector (1)
5	Remove charge air temperature and boost pressure combination sensor (B111)	 Installation: Clean sealing surfaces.
			*BA09.41-N-1008-01B
6	Install in the reverse order

 Charge air pipe/charge air cooling

Number	Designation		Engine 900.9 in model 375, 970, 972, 975, 976 Engine 902.9 in model 375, 970, 972, 974, 975, 976	Engine 902.9 in model 375, 950, 952, 953, 954	Engine 902.9, 906.9, 926.9 in Model 957


BA09.41-N-1008-01B	Bolt, charge air temperature and charge pressure combination sensor to charge air manifold	Nm	10	10	10

 Charge air pipe/charge air cooling

Number	Designation		Engine 924.9 in model 375, 958, 970, 972, 974, 975, 976	Engine 925.9 in models 970, 972, 974, 975, 976	Engine 926.9 in model 950, 952, 953, 954, 958


BA09.41-N-1008-01B	Bolt, charge air temperature and charge pressure combination sensor to charge air manifold	Nm	10	10	10