W09.41-1018-06
1 Charge air manifold/charge air housing
2 Charge air pipe
3 Adapter piece
3.1 Sealing ring
| Remove/Install | ||
1 | Remove charge air manifold/charge air housing (1) | ||
2 | Loosen the charge air pipe (2) on the charge air hose (red) | Installation: the red charge air hose must not be confused with the black charge air hose. | |
Perform a visual inspection of the red charge air hose and clamp. In the event of damage: | |||
replace red charge air hose or clamp. | |||
| |||
3 | Remove charge air pipe (2) | ||
4 | Pull out intermediate pieces (3) at charge air pipe (2) | Installation: Replace sealing rings (3.1). | |
| Intermediate piece charge air housing to turbocharger modified | As of engine end no. 026083 | |
5 | Install in the reverse order |
Charge air pipe/charge air cooling