ar0920d1310f
Remove/install intake manifold
ประเภท ar · หัวข้อ 09.20 · เวอร์ชัน 0101 · 2019-12-02
ใช้กับ: Engine 111.984 in model 902.612/661/662/672, 903.612/613/622/661/662/663/672/673, 904.612/613/662/663 with code MS7 (NGT (Natural-Gas Technology) Sprinter) -
ไม่มีใน “th” แสดงเป็น อังกฤษ
ตำแหน่ง
กลุ่มฟังก์ชัน 1 Engine › 09 Air intake, turbocharging › 09.20 Intake manifold, intake manifold preheater — ซีรีส์ 902 (รุ่น 612, 661, 662, 672) · ซีรีส์ 903 (รุ่น 612, 613, 622, 661, 662, 663, 672, 673) · ซีรีส์ 904 (รุ่น 612, 613, 662, 663)
EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — ซีรีส์ 902 (รุ่น 612, 661, 662, 672) · ซีรีส์ 903 (รุ่น 612, 613, 622, 661, 662, 663, 672, 673) · ซีรีส์ 904 (รุ่น 612, 613, 662, 663)
ใช้กับเครื่องยนต์/เกียร์ด้วย: 111 984
AR09.20-D-1310F
| Remove/install intake manifold
| 15.11.2019
|
Engine
| 111.984 in model 902.612/661/662/672, 903.612/613/622/661/662/663/672/673, 904.612/613/662/663
|
|
| with code MS7 (NGT (Natural-Gas Technology) Sprinter)
|
|
| -
|
1
| Air intake hose
|
2
| Clip
|
3
| Injection valve connector
|
4
| Gas temperature sensor connector
|
5
| Gas pressure sensor connector
|
6
| Vacuum line
|
7
| Bracket
|
8
| Gas filter
|
9
| Intake manifold
|
10
| Idle speed control actuator
|
11
| Intake manifold gasket
|
12
| Cylinder head cover trim panel
|
13
| Idle speed control connector
|
| Remove/install
|
|
|
1
| Disconnect battery ground line
|
|
|
2
| Remove air intake hose (1)
|
| AR09.10-D-8030F
|
3
| Remove idle speed control actuator (10)
|
| AR30.22-D-1152D
|
4
| Unclip the clip (2) from the cylinder head cover and remove the connector (3) from the injection valves on the intake manifold
|
|
|
5
| Remove the connector (4, 5) from the gas temperature and gas pressure sensor
|
|
|
Danger
| Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)
| Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.
| AS00.00-Z-0035-01A
|
6
| Unplug the connector from the primary side of ignition coils, and run the lines out of the housing of the cylinder head cover
| The lines are included with the other lines in a subharness and passed downwards through the intake manifold.
|
|
7
| Detach vacuum lines (6) from intake manifold
|
| AR09.20-D-1310-06D
|
|
|
| Vacuum line at intake manifold vacuum fitting
| *BA09.20-N-1004-02A
|
8
| Remove intake manifold (9) from cylinder head
|
| AR09.20-D-1310-07F
|
|
|
| Intake manifold to cylinder head
| *BA09.20-N-1001-02A
|
9
| Install in the reverse order
|
|
|
Intake manifold, intake manifold preheating
|
Number
| Designation
|
|
| Engine 111.979/984
|
BA09.20-N-1001-02A
| Intake manifold to cylinder head
| M8
| Nm
| 21
|
Intake manifold, intake manifold preheating
|
Number
| Designation
|
| Engine 111.979/984
|
BA09.20-N-1004-02A
| Vacuum line at intake manifold vacuum fitting
| Nm
| 30
|
เอกสารที่อ้างถึง
