Diesel injection system with unit pumps (MR/PLD)
Number | Designation | Engine Engine | ||
BA07.15-N-1002-01A | Bolt of control unit of engine control (MR) to crankcase | Nm | 15 | |
D07.15-0004-11
1 Unscrew bolts (1), take off cable recess (4) and rubber shock absorber (3).
Installation: Note installation position of rubber shock absorber (3).
Pay attention to tightening torque.
2 Carefully push dipstick guide tube (4) to the side.
3 Take control unit (A6) off the crankcase.
Control unit (A6) must not be disassembled.
Installation: Rubber shock absorbers (3) must be installed at the control unit (A6).