ar0715d162803d

Detach, attach MR/PLD control unit at crankcase

Type ar · topic 07.15 · version 0112 · 2005-05-31

Applies to: ENGINE 904.904 in MODEL 670 ENGINE 904.908 /914 /923 /936 in MODEL 668, 670

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.15 Diesel injection system (PLN), Engine control (MR) — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)

EinPAS 15 Engine › 15.45 Engine management › 15.45.11 Control unit/relay — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)

AR07.15-D-1628-03D

Detach, attach MR/PLD control unit at crankcase

Diesel injection system with unit pumps (MR/PLD)

Number

Designation

Engine
904.9,

Engine
906.9
without code MS8

BA07.15-N-1002-01A

Bolt of control unit of engine control (MR) to crankcase

Nm

15

Detach, attach MR/PLD control unit at crankcase

D07.15-0004-11

1 Unscrew bolts (1), take off cable recess (4) and rubber shock absorber (3).

Installation: Note installation position of rubber shock absorber (3).

Pay attention to tightening torque.

2 Carefully push dipstick guide tube (4) to the side.

3 Take control unit (A6) off the crankcase.

Control unit (A6) must not be disassembled.

Installation: Rubber shock absorbers (3) must be installed at the control unit (A6).