AR07.12-T-8244B | Check start of delivery | 3.11.09 |
ENGINE 441.980 in MODEL 613.355 /364 /365
ENGINE 402.970, 446.938 in MODEL 613.455 /485
T07.12-0011-11
Markings for port closing (arrow)
| Checking | ||
1 | Open maintenance flap | ||
2 | Remove charge air cross pipe | Engine 446.938, 402.970 | |
3 | Unscrew screw plug on the timing case cover | | |
4 | Attach cranking device | | |
5 | Crank engine until cylinder 1 stands at ignition TDC | The start of delivery markings on the flywheel must be coincide with the marking edge in the spy hole. | |
6 | Check start of delivery (basic setting) in the spy hole of the timing case cover | The markings (chisel blows) on the injection pump and drive flange must match. If there is a negative result: | |
Set start of delivery | |||
7 | Screw in screw plug on the timing case cover | | |
8 | Install charge air cross pipe | Engine 446.938, 402.970 | |
9 | Close maintenance flap |
Cylinder crankcase, timing case cover, end cover
Number | Designation | Engine 402.970 | Engine 441.980 | Engine 446.938 | ||
BA01.40-N-1019-01K | Screw plug, spy hole to timing case cover | M38X1.5 | Nm | 40 | 40 | 40 |
Cranking device
407 589 00 63 00