Remove/install belt pulley/vibration damper

AR03.30-B-1600D

12.02.16

Cumbustion engine 457 with Vehicle 696.080

Cumbustion engine 457.924 with Vehicle 696.365, 696.367, 696.369

Cumbustion engine 457.928 with Vehicle 693.154, 693.194, 693.196

Cumbustion engine 457.931 with Vehicle 696.365, 696.367, 696.369, 696.090

B03.30-0008-06

1 Fan belt

2 Air conditioning compressor/alternator/water pump belt

3 Bolts

4 Intermediate pulley

5 Bolts

6 Anti-vibration pulley

7 Oil deflector

8 Pulley cap (engine 457.922/928)

9 Screws (engine 457.922/928)

	Remove and install
1	Remove the fan.	Motor 457.924/931	AR20.40-B-5614C
		Motor 457.922/928	AR20.40-B-5614D
2	Remove belts (1/2).	Motor 457.924/931	AR13.22-B-1202B
		Motor 457.922/928	AR13.22-B-1202D
3	Remove the screws (9) and intermediate pulley (4) cap (8).	Motor 457.922/928
4	Remove the screws (3) and intermediate pulley (4).		*BA03.30-B-1003-01E
5	Remove the anti-vibration pulley (6) clamping bolts (5).	Block the engine with an appropriated device on the flywheel ring gear.
			*BA03.30-B-1002-01E
6	Remove the anti-vibration pulley (6).	Hits and falls can damage the anti-vibration.
7	Remove the oil deflector (7).	Install: assembly oil deflector (7) with tab faced to engine/radial seal ring.
	Check it
8	Check the anti-vibration pulley regarding damages and/or wear.	Deformation by kneading can cancel the pulley damping function. In the event of deformation (kneading) and/or excessive wear in the belt area, replace the anti-vibration pulley.
9	Check the front sealer leak tightness of crankshaft.	In the event of leaking lubricant oil by front sealer 
		Replace the sealer.	AR01.40-B-8810A
10	Install in the reverse order

Flywheel, driven plate, vibration damper, starter ring gear

Número	Denominação		Engine 457.9


BA03.30-B-1002-01E	Vibration damping pulley to crankshaft	Nm	200
BA03.30-B-1003-01E	Intermediate pulley to vibration damping pulley	Nm	30