AR03.20-W-4841A | Remove/install drive gear for oil pump on crankshaft | 19.9.06 |
ENGINE 902.9 in MODEL 957 with CODE (MS8) Natural gas engine
ENGINE 904.904 in MODEL 670
ENGINE 904.908 /914 /923 /936 in MODEL 668, 670
ENGINE 904.9 in MODEL 374, 375, 673, 674, 676, 958, 970, 972, 975, 976
ENGINE 906.9 in MODEL 374, 958, 970, 972, 974, 975, 976
ENGINE 906.9 in MODEL 374, 375, 950, 952, 953, 954, 957, 958
W03.20-0006-10
1 Drive gear
2 Crankshaft
| Removing | ||
1 | Remove crankshaft (2) | ||
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
2 | Remove drive gear (1) from crankshaft (2) | Warm drive gear (1) to about 200°C for disassembly. | |
| Install | ||
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
3 | Mount drive gear (1) on crankshaft (2) | Warm drive gear (1) to about 200 °C for assembly. Observe installation position of groove (arrow) on drive gear (1). | |
4 | Install crankshaft (2) |