ar0320w4841a

Remove/install drive gear for oil pump on crankshaft

Type ar · topic 03.20 · version 0112 · 2008-04-28

Applies to: ENGINE 902.9 in MODEL 957 with CODE (MS8) Natural gas engine ENGINE 904.904 in MODEL 670 ENGINE 904.908 /914 /923 /936 in MODEL 668, 670 ENGINE 904.9 in MODEL 374, 375, 673, 674, 676, 958, 970, 972, 975, 976 ENGINE 906.9 in MODEL 374, 958, 970, 972, 974, 975, 976 ENGINE 906.9 in MODEL 374, 375, 950, 952, 953, 954, 957, 958

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.20 Crankshaft — Series 374 · Series 375 · Series 668 · Series 670 · Series 673 · Series 674 · Series 676 · Series 902 (models 9**) · Series 904 (models 9**, 904, 908, 914, 923, 936) · Series 906 (models 9**) · Series 950 · Series 952 · Series 953 · Series 954 · Series 957 · Series 958 · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 374 · Series 375 · Series 668 · Series 670 · Series 673 · Series 674 · Series 676 · Series 902 (models 9**) · Series 904 (models 9**, 904, 908, 914, 923, 936) · Series 906 (models 9**) · Series 950 · Series 952 · Series 953 · Series 954 · Series 957 · Series 958 · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 15 Engine › 15.20 Engine lubrication system › 15.20.30 Oil pump/drive/oil spray nozzle/oil suction pipe — Series 374 · Series 375 · Series 668 · Series 670 · Series 673 · Series 674 · Series 676 · Series 902 (models 9**) · Series 904 (models 9**, 904, 908, 914, 923, 936) · Series 906 (models 9**) · Series 950 · Series 952 · Series 953 · Series 954 · Series 957 · Series 958 · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

AR03.20-W-4841A

Remove/install drive gear for oil pump on crankshaft

19.9.06

ENGINE 902.9 in MODEL 957 with CODE (MS8) Natural gas engine

ENGINE 904.904 in MODEL 670

ENGINE 904.908 /914 /923 /936 in MODEL 668, 670

ENGINE 904.9 in MODEL 374, 375, 673, 674, 676, 958, 970, 972, 975, 976

ENGINE 906.9 in MODEL 374, 958, 970, 972, 974, 975, 976

ENGINE 906.9 in MODEL 374, 375, 950, 952, 953, 954, 957, 958

Remove/install drive gear for oil pump on crankshaft

W03.20-0006-10

1 Drive gear

2 Crankshaft

Removing

1

Remove crankshaft (2)

AR03.20-W-4351A

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

2

Remove drive gear (1) from crankshaft (2)

Warm drive gear (1) to about 200°C for disassembly.

Install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

3

Mount drive gear (1) on crankshaft (2)

Warm drive gear (1) to about 200 °C for assembly. Observe installation position of groove (arrow) on drive gear (1).

4

Install crankshaft (2)

AR03.20-W-4351A

Referenced documents