Remove race on crankshaft, install

AR03.20-T-2570A

2.4.98

ENGINE 441.980 in MODEL 613.355 /364 /365

ENGINES 402.970, 446.938 in MODELS 613.455 /485

ENGINE 447, 489

T01.40-0023-06

1 Belt pulley/vibration damper

2 Front housing cover

3 Ring of extractor

4 Bolt of extractor

5  Extractor

6 Claws of extractor

7  Drift

8 Race

	Removing
1	Remove front housing cover (2)	Model 613.355/364/365/455/485.	AR01.40-T-8800B
		Model 671.	AR01.40-T-8800T
2	Pull off race (8)	 Puller  If race is tight, upend with the aid of a chisel in order to achieve a stretching of the race.	*403589013300
	Installing
Danger!	Risk of injury to skin and eyes from handling hot or glowing objects	Wear protective gloves, protective clothing and, if necessary, eye protection.	AS00.00-Z-0002-01A
3	Heat race (8)	 Use a heating plate to approx. 200 °C.
4	Knock on race (8)	 Drift  Moisten contact surface of radial shaft seal with engine oil. Collar of race must be pointing in.	*403589061500
5	Install front housing cover (2)	Model 613.355/364/365/455/485.	AR01.40-T-8800B
		Model 671.	AR01.40-T-8800T

403 589 01 33 00

Puller

Drift

403 589 06 15 00