AR01.40-T-8800B | Remove, install housing cover at front | 26.5.00 |
ENGINE 441.980 in MODEL 613.355 /364 /365
ENGINES 402.970, 446.938 in MODELS 613.455 /485
T01.40-0024-11
1 Splash ring
2 Bolt of oil pan to housing cover
3 Oil pan
4 Housing cover
5 Bolt of oil pan to crankcase
6 Gasket
7 Radial seal
8 Crankshaft race
| Removal | ||
1 | Remove vibration damper | ||
2 | Take off splash ring (1) | ||
3 | Remove oil pan (3) | ||
4 | Detach housing cover (4) | ||
5 | Remove radial seal (7) | ||
| Check | ||
6 | Inspect race (8) | Inspect race for traces of running wear, scores or cracks. If necessary, replace race. | |
Remove race on crankshaft, install | |||
| Installation | ||
7 | Replace radial seal (7) | ||
8 | Clean any gasket residues off sealing surfaces on housing cover (4) and crankcase | ||
9 | Install housing cover (4) | - Replace gasket (6). - Moisten sealing lip of radial seal (7) and race (8) on the crankshaft lightly with engine oil. | |
| Check | ||
10 | Inspect seat of radial seal (7) on crankshaft |
Crankcase, timing case cover, end cover
Number | Designation | Engine 402.970 | Engine 441.980 | Engine 446.938 | |
BA01.40-N-1001-01K | Bolt of housing cover to crankcase | Nm | 25 | 25 | 25 |
Oil pan