P01.40-2162-11
2 End cover
3 Crankshaft radial sealing ring
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | |
1 | Remove end cover (2) | Installation: The end cover (2) must be replaced as the crankshaft radial sealing ring (3) is vulcanized into the end cover (2) and otherwise leaks may occur. | |
Installation: Instructions in notes on sealant application and on correct installation of the end cover (2) must be strictly observed. Environmental and engine damage can occur if there is wrong installation. See | |||
Install rear crankshaft radial sealing ring | |||
2 | Install in the reverse order |