Replacong the front crankshaft radial seal

AR03.20-P-3000HB

Replacong the front crankshaft radial seal

2.12.02

 

Removing/installing

Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove poly-V-belt (1)

AR13.22-P-1202HB

2

Install retaining lock (2) for crankshaft or ring gear

Engine 611.960 in model 202.133/134/ 193/194

Engine 611.961 in model 210.006 /006/007/606206/606

Engine 612.961 in models 210.016/216/616

Engine 612.963 in model 163.113

Engine 612.965 in model 463.322/323

Engine 612.966 in model 461.302/331/332/342/345

Engine 613.961 in model 210.026/226

Engine 613.960 in model 220.026

AR03.30-P-5000HB

Engine 611.962 in model 203.004/006/204/206/706

Engine 612.962 in model 203.016/216

Engine 612.990 in model 203.018/218/718

Engine 612.967 in model 209.316

AR03.30-P-5000PP

3

Remove belt pulley with vibration damper (6)

 Inspect contact surface of hub for signs of wear.

AR03.30-P-1600HB

4

Use a screwdriver to press out crankshaft radial seal (8)

 Do not damage crankshaft and mounting hole for crankshaft radial seal (8). Use a clean cloth as a base.

 After thorough degreasing of the crankshaft and mounting hole for the crankshaft radial sealing ring (8):



Install front crankshaft radial seal (8)

AR03.20-P-3000-01C

5

Install in reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

6

Run engine and inspect for leaks