Replacing front crankshaft radial seal

AR03.20-D-3000C

13.2.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

D03.20-1000-06

1 Crankshaft radial seal

2  Sleeve

"A" Crankshaft radial seal (standard)

"B" Crankshaft radial seal (repair position)

	Removing
1	Remove belt pulley / vibration damper		AR03.30-D-1600C
2	Press out crankshaft radial seal (1)	 Do not damage crankshaft and mounting hole for crankshaft radial seal (1). Use a clean cloth as a base.
	Installing
3	Use sleeve (2) to install front crankshaft radial seal	 If a wear groove from the old radial seal can be felt at the hub of the belt pulley/vibration damper, use insertion sleeve 606 589 00 14 00 with larger insertion depth (repair position).	AR03.20-D-3000-01C
			*601589031400
4	Install belt pulley/vibration damper		AR03.30-D-1600C
5	Check for leaks Check for leaks	 Inspect for oil leaks after spraying the cleaned and dried surrounding area.	*BR00.45-Z-1001-03A

601 589 03 14 00

Sleeve

606 589 00 14 00

Sleeve

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-03A	Crack detector	A 000 989 03 59