Remove/install bottom part of oil pan

AR01.45-P-7555CV

18.02.2020

Engine	272 in model 204.0/2
	Vehicles with rear sump
Engine	272, 273 in model 207
	Vehicles with rear sump

1	Oil pan bottom section
1b	Bolts
1c	Forcing bore

P01.45-2253-11

 	Remove/install
Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
1	Drain engine oil
		Engine 273 in model 207	AP18.00-P-0101-06SX
		Engine 272 in models 204.0/2, 207	AP18.00-P-0101-06V
2	Remove screws (1b)	 Screw/bolt, oil pan bottom section to oil pan	*BA01.45-P-1003-01M
3	Release oil pan bottom section (1) from oil pan and remove
	Notes on sealant path for oil pan		AH01.45-P-0001-01VA
		 To do so, screw the screw into the forcing bore (1c) and use an assembly wedge to release the oil pan bottom section (1) from the oil pan. Only pry off oil pan bottom section (1) with the screw from the oil pan until the assembly wedge can be pushed between the sealing surfaces. The oil pan bottom section (1) and sealing surface of the oil pan will otherwise be damaged.
		 If necessary, heat the oil pan bottom section (1) in the area of the sealing surfaces using a hot air gun.
		Sealant, Loctite 5970, 50 ml	*BR00.45-Z-1013-01A
		 Mounting wedge	*110589035900
		 Application gun	*112589002500
	Clean
4	Clean sealing surfaces on oil pan bottom section (1) and oil pan		AR01.00-P-0050-01A
		 Do not use any sharp-edged tools or abrasive paper. The sealing surfaces will be damaged otherwise.
		Loctite 7200	*BR00.45-Z-1038-04A
		Loctite 7063 (400 ml) cleaning spray	*BR00.45-Z-1046-04A
5	Install in the reverse order
	Check
6	Check engine oil level; correct if necessary
		Engine 272 in models 204.0/2, 207	AP18.00-P-0101-06V
		Engine 273 in model 207	AP18.00-P-0101-06SX
 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
7	Carry out an engine test run, checking the engine for proper operation and leaktightness

 Oil pan

Number	Designation		Engine 272	Engine 273
BA01.45-P-1003-01M	Screw/bolt, oil pan bottom section to oil pan	Nm	9	14

110 589 03 59 00

Mounting wedge

112 589 00 25 00

Application gun

Repair materials

Number	Designation	Order number
BR00.45-Z-1013-01A	Sealant, Loctite 5970, 50 ml	A 003 989 98 20 10
BR00.45-Z-1038-04A	Loctite 7200	Henkel AG & Co. KGaA http://www.loctite.de
BR00.45-Z-1046-04A	Loctite 7063 (400 ml) cleaning spray	A 001 986 71 71 09

เอกสารที่อ้างถึง