Modification notes |
20.09.2019 | Oil pan from the engine to the block | Engine 904.9, 906.9 | BA01.45-B-1001-01B |
20.09.2019 | Oil pan from the engine to the block | Engine 924.9, 926.9 | BA01.45-B-1001-01B |
30.10.2019 | Oil pan from the engine to the block | BA01.45-B-1001-01B | |
30.10.2019 | Oil pan drain plug | BA01.45-B-1002-01B |
1 | Oil pan |
2 | Oil sump gasket |
3 | Oil pan clamping bolt |
4 | Seal ring |
5 | Oil pan drain plug |
6 | Sensor connector |
7 | Oil filling pipe |
B14 | Oil pan level sensor |
B01.45-0002-06
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Remove/install | ||
1 | Remove engine lower panelling |
| |
2 | Drain the lubricant oil pan | ||
| . | ||
Catch the oil in an appropriate container. | |||
Installation: Replace the sealing ring (4), observe the correct tightening for the oil pan drain plug (5) and refill the oil pan. | |||
.Oil pan drain plug | |||
3 | Remove the engine filler line (7) | ||
4 | Release the oil level (B14) sensor connector (6) | ||
5 | Remove the screws (3), then remove the oil sump (1) | | |
Use the microencapsulated screws (3) for mounting M8x35 - N000000002815 | |||
Clean the oil pan and its sealing gasket settlement surface on the engine block. | |||
Installation: Replace oil gasket (2) and observe its correct positioning. | |||
.Oil pan from the engine to the block | |||
6 | Install in reverse order | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Starting the engine | Do not crank the engine continuously for more than 30 seconds. | |
8 | Check the engine oil pressure with the engine idling | Do not accelerate the engine until oil pressure is shown on the indicator. | |
.Engine oil pressure, minimum permissible | |||
9 | Stop the engine and check for eventual leaks | ||
| . | ||
Control the engine oil level , 5 minutes after engine shutdown. |