Measure projection of cylinder liner

เอกสารที่อ้างถึง

AR01.40-T-9314A

3.8.11

ENGINES 441.980 in MODEL 613.355 /364 /365

ENGINES 402.970, 446.938 in MODEL 613.455 /485

ENGINES 447, 489

T01.40-0022-06

Shown on engine 447, 489

1.1  Measuring plate

1.2  Spacer sleeve

2 Short cylinder head bolt

3  Dial indicator

4  Dial indicator holder

A Cylinder liner

B Separating surface of cylinder block

C Protrusion

	Removing
1	Remove cylinder head	 Clean surface of crankcase and of cylinder liner.
		Engine 447, 489 in model 671.	AR01.30-T-5800A
		Engine 441.980 in model 613.355/ 364/ 365, engine 402.970, 446.938 in model 613.455/ 485.	AR01.30-T-5800B
	Measure
2	Mount measuring plate (1.1) onto cylinder liner (A), fit on spacer sleeves (1.2) and attach with short cylinder head bolts (2)	 - Collar for measuring plate must point toward cylinder liner. - Pay attention to tightening torque: 
			*402589002100
			*BA01.40-N-1003-01H
			*BA01.40-N-1004-01K
3	Place dial gage holder (4) together with inserted and tightened dial gage (3) and extension, onto measuring plate (1.1)	 The dial gage must be mounted with a preload onto the surface of the crankcase and then set to '0'.
			*001589532100
			*343589004000
4	Push dial gage (3) into the recess of the measuring plate (1.1) until the latter is touching the outer collar surface of the cylinder liner (A)	 Read off dial gage and repeat the measurement at the three remaining measuring points. The dial gage must be set to '0' on the surface of the crankcase each time before each measurement.
		Projection of cylinder liner with pretensioned cylinder liner. 
		Engine 447, 489.	*BE01.40-N-1003-03D
		ENGINES 441.980, 402.970, 446.938	*BE01.40-N-1001-03F
		Difference of cylinder liner projection, measured at four points. 
		Engine 447, 489.	*BE01.40-N-1004-03D
		ENGINES 441.980, 402.970, 446.938	*BE01.40-N-1002-03F
		If the measurement for the projection is not within the tolerance of the specifications: 
		Take off measuring plate and reface collar seat in crankcase	AR01.40-T-9304B
	Install
5	Install cylinder head	Engine 447, 489 in model 671.	AR01.30-T-5800A
		Engine 441.980 in model 613.355/ 364/ 365, engine 402.970, 446.938 in model 613.455/ 485.	AR01.30-T-5800B

Test and adjustment values for cylinder liner

Number	Designation			Engine 402.970	Engine 441.980	Engine 446.938


BE01.40-N-1001-03F	Cylinder liner protrusion with pre-compressed cylinder liner	up to engine end no. 001 352	mm	0.03 to 0.07	-	-
		-	mm	0.05 to 0.09	0.03 to 0.09	0.03 to 0.09
BE01.40-N-1002-03F	Difference in cylinder liner projection		mm	0.02	0.02	0.02

Test and adjustment values for cylinder liner

Number	Designation		Engine 447	Engine 489


BE01.40-N-1003-03D	Cylinder liner protrusion with pre-compressed cylinder liner	mm	0.05-0.09	0.05-0.09
BE01.40-N-1004-03D	Difference of cylinder liner projection, measured at four points	mm	0.02	0.02

 Crankcase, timing case cover, end cover

Number	Designation		Engine 447	Engine 489


BA01.40-N-1003-01H	Measuring plate on crankcase	Nm	50	50

 Cylinder crankcase, timing case cover, end cover

402 589 00 21 00

Dial indicator holder

Measuring plate

Dial indicator

001 589 53 21 00

343 589 00 40 00

Designation

Engine 402.970

Engine 441.980

Engine 446.938

BA01.40-N-1004-01K

Bolt, measuring plate to crankcase