Secure vehicle on vehicle lift

AR00.60-S-0100E

Secure vehicle on vehicle lift

10.04.2017

Model

447, 448

Modification notes

30.03.2017

Method fully modified

Operation steps 1 to 17

Shown: Front vehicle securing device

1

Tensioning strap

2

Guide rails

3

Support arms

Shown: Left rear vehicle securing device

4

Tensioning strap

5

Supporting arm

6

Semi-trailing arm

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01A

Install front securing device

1

Position vehicle as centrally as possible between the vehicle lift columns

2

Move front seats to front-most position

3

Remove front passenger bench seat seat cushion support

Model 447.6/7
with code S23 (Co-driver's seat double seat)

AR91.10-S-5036E

4

Raise vehicle

AR00.60-S-1000E

 Jack up vehicle only until the wheels are clear of the ground.

5.1

Route suitable tensioning strap (1) below the guide rails (2) of the front seats along the support arms (3) of the vehicle lift

Model 447
except code S23 (Co-driver's seat double seat)

 The front doors can now no longer be closed. For extended periods of work, switch off interior lighting.

5.2

Route suitable tensioning strap (1) over the front passenger bench seat and below the guide rails (2) of the driver's seat along the support arms (3) of the vehicle lift

Model 447
with code S23 (Co-driver's seat double seat)

 The front doors can now no longer be closed. For extended periods of work, switch off interior lighting.

6

Tension tensioning strap (1) using accompanying ratchet


Only tension tensioning strap (1) until a sufficient tension for securing the vehicle is achieved.
This prevents damage.

 Store remaining tensioning strap (1) accordingly.

Check

7

Check securing device

If necessary



Retension tensioning strap (1).

Install rear securing device

8

Raise vehicle to full height

AR00.60-S-1000E

9

Route suitable tensioning strap (4) at the support arm (5) and semi-trailing arm (6).

 Depending on the work being done on the vehicle, secure the respective side or both sides of the vehicle.

10

Tension tensioning strap (4) using accompanying ratchet


Only tension the tensioning strap (4) until sufficient tension for securing the vehicle is achieved.
This prevents damage.

Check

11

Check securing device

If necessary



Retension tensioning strap (4).



Remove

12

Remove tensioning straps (1, 4) from support arms (3, 5)

13

Remove respective tensioning strap (4) from respective semi-trailing arm (6)

14

Lower vehicle

15

Remove tensioning strap (1) from vehicle interior

16

Install seat cushion padding on front passenger bench seat

Model 447.6/7
with code S23 (Co-driver's seat double seat)

AR91.10-S-5036E

17

Move front seats to their original position