S91.10-4577-08
Shown on old version of seat frame base |
1 | Seat cushion padding |
S91.10-4578-09
Shown on old version of seat frame base |
1 | Seat cushion padding | 3 | Retaining bracket | 4 | Retaining clips | ||
2 | Seat frame |
S91.10-A007-09
Shown on new version of seat frame base |
1 | Seat cushion padding | 5 | Mounting clip | 5.1 | Pin | ||
2 | Seat frame |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Check which variant of seat frame base (2) is installed. | There are two different versions of the seat frame base (2). | |
As only the new version of the seat frame base (2) is available as a replacement part, the new version may also be installed on older vehicles. | |||
2.1 | Lift seat cushion padding (1) in front area (arrow A) until mounting frame bows (3) are unclipped from retaining clips (4). | When unclipping seat cushion padding (1) from old version of seat frame base (2). | |
Installation: Ensure that mounting frame bows (3) are clipped correctly into retaining clips (4). | |||
2.2 | Release pins (5.1) of retaining clips (5) through bores (arrows F) using a suitable tool (arrow E) and lift seat cushion padding (1) in front area (arrow A). | When unclipping seat cushion padding (1) from new version of seat frame base (2). | |
Installation: Ensure that mounting frame bows (3) are clipped correctly into retaining clips (5). | |||
3 | Remove seat cushion padding (1) forward (arrow B) from seat frame base (2). | Installation: Ensure that mounts (arrows C) are seated correctly in holders (arrows D). | |
4 | Check retaining clips (4 or 5) for damage. | If a retaining clip (4 or 5) is damaged: | |
| |||
Replace retaining clip (4 or 5). | |||
5 | Install in the reverse order |