ap8235p8252d

Windshield wipers, windshield washer system - operational inspection

ประเภท ap · หัวข้อ 82.35 · เวอร์ชัน 0104 · 2018-07-06

ใช้กับ: Model 213, 238, 257, 290

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — ซีรีส์ 213 · ซีรีส์ 238 · ซีรีส์ 257 · ซีรีส์ 290

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.1 Basic information — ซีรีส์ 213 · ซีรีส์ 238 · ซีรีส์ 257 · ซีรีส์ 290

AP82.35-P-8252D

Windshield wipers, windshield washer system - operational inspection

27.06.2018

Model

213, 238, 257, 290

Windshield wipers, windshield washer system - operational inspection

P82.35-2823-08

Shown on model 213.0, spray pattern on windshield

Windshield wipers, windshield washer system - operational inspection

P82.35-2828-09

Shown on model 213.0

1

Left wiper blade

2

Right wiper blade

Warning

Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.

When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).

AS82.30-Z-0001-01A

Danger

Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin.

Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children.

AS82.35-Z-0001-01A

Preparatory activity

1

Close hood.

2

Close liftgate, doors and side windows.

3

Switch electronic ignition lock control unit to position "2" (circuit 15).

Check/correct

4

Check spray nozzles of windshield washer system for proper operation and setting.

If the spray jet does not hit inside the marked area,

correct the setting.

If a spray nozzle is clogged,

Clean spray nozzle and/or blow out with compressed air from inside to outside or replace spray nozzle.

After obtaining special order.

5

Check park position of left wiper blade (1) and right wiper blade (2) on windshield.

Wiper blade ends must be located at markings "A" and "B" (see arrows) on windshield and they may be offset by no more than 10 mm (0.39 Inch) upwards or downwards.

If the park position deviates,

Check and adjust wiper arms.

After obtaining special order.

6

Spray water onto windshield using windshield washer system.

7

Switch on windshield wipers at highest setting.

8

Check adjustment of wiper arms on windshield.


The left wiper blade (1) and right wiper blade (2) must not collide with the A-pillar or cowl.
Damage can otherwise occur.

If problems occur,

rectify problems.

After obtaining special order.

Finishing activity

9

Switch electronic ignition lock control unit to position "0".

10

Check/correct fluid level of windshield washer system.

Only for service with Plus package.

AP82.35-P-8210C

เอกสารที่อ้างถึง