Windshield wipers, windshield washer system and headlamp cleaning system - function check

AP82.30-P-8252A

Windshield wipers, windshield washer system and headlamp cleaning system - function check

12.3.13

MODEL

203, 209, 211

Shown on model 203.0

Shown on model 203.2

S1s1

HCS [SRA] switch (model 211)

S1s7

HCS [SRA] switch (model 203, 209)



Check

 Danger !

Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin.

Wear protective clothing and tight-fitting safety glasses. No fire, naked flames or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children.

AS82.35-Z-0001-01A

 Danger !

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of the mechanism when the components are moving.

AS00.00-Z-0009-01A

1

Close engine hood



MODEL 203

AR88.40-P-1000P



MODEL 209

AR88.40-P-1000Q



MODEL 211

AR88.40-P-1000T

2

Close liftgate or trunk lid, doors, sliding roof and side windows

3

Switch on ignition

4

Check function of spray nozzles for windshield washer system on windshield and the setting

TYP 203, 209

AP82.35-P-8252-01P

MODEL 211

AP82.35-P-8252-01T

 The spray jet must hit the windshield in the marked area. Correct the adjustment if necessary.

 Adjusting tool

*110589026300

For clogged up spray nozzle:



Clean spray nozzle using suitable needle and/or blow out with compressed air from inside out or replace spray nozzle subject to separate invoice.

5

Check function of spray nozzles for windshield washer system on rear window and the setting

TYP 203.2/7, 211.2/6

MODEL 203, 209

AP82.35-P-8252-01P

MODEL 211

AP82.35-P-8252-01T

For spray nozzles that cannot be adjusted and with a deviating spray pattern:



Replace spray nozzle subject to separate repair order.

For clogged up spray nozzle:



Clean spray nozzle using suitable needle and/or blow out with compressed air from inside out or replace spray nozzle subject to separate invoice.

6

Check park position of wiper blades


The wiper blades must not come into contact with the A-pillar, cowl or liftgate.
Otherwise the body or wiper mechanism will be damaged.

In the event of any deviation to the park position:



Check and adjust wiper arms subject to separate repair order.

7

Check setting of wiper arms on windshield


The wiper blades must not come into contact with the A-pillar or cowl.
The body or wiper mechanism will otherwise be damaged.

 Spray water over the windshield washer system on the windshield and switch on wiper at highest setting.

If there are problems:



Determine and rectify cause, subject to separate repair order.

8

Check setting of wiper arm on rear window

MODEL 203.2/7, 211.2/6


Wiper blade must not make contact with the liftgate.
Otherwise the liftgate or wiper mechanism may be damaged.

 Spray water over the windshield washer system on the rear window and switch on wiper at highest setting.

If there are problems:



Determine and rectify cause, subject to separate repair order.

9

Switch on low beam

Vehicles with CODE 600 (Headlamp cleaning system) or with CODE 614 (Bi-xenon headlamp unit) or with CODE 615 (Bi-xenon headlamp unit with integrated curve illumination)

10.1

Press HCS [SRA] switch (S1s1, S1s7)

Vehicles with CODE 600 (Headlamp cleaning system) or with CODE 614 (Bi-xenon headlamp unit) or with CODE 615 (Bi-xenon headlamp unit with integrated curve illumination)
Vehicles with HCS [SRA] switch (S1s1, S1s7)

 The spray jet must impact in the light source area on the headlamp lens. Correct setting if necessary.

 Adjusting tool

*110589026300

For clogged up spray nozzle:



Clean spray nozzle using suitable needle and/or blow out with compressed air from inside out or replace spray nozzle subject to separate invoice.

For spray nozzles that cannot be adjusted and with a deviating spray pattern:



Replace spray nozzle subject to separate repair order.

10.2

Repeatedly operate windshield washer system of windshield

Vehicles with CODE 600 (Headlamp cleaning system) or with CODE 614 (Bi-xenon headlamp unit) or with CODE 615 (Bi-xenon headlamp unit with integrated curve illumination)
Vehicles without HCS [SRA] switch (S1s1, S1s7)

 Repeatedly operate windshield washer system for windshield until the headlamp cleaning system is activated. The spray jet must impact in the light source area on the headlamp lens. Correct setting if necessary.

 Adjusting tool

*110589026300

For clogged up spray nozzle:



Clean spray nozzle using suitable needle and/or blow out with compressed air from inside out or replace spray nozzle subject to separate invoice.

For spray nozzles that cannot be adjusted and with a deviating spray pattern:



Replace spray nozzle subject to separate repair order.

11

Switch off low beam

Vehicles with CODE 600 (Headlamp cleaning system) or with CODE 614 (Bi-xenon headlamp unit) or with CODE 615 (Bi-xenon headlamp unit with integrated curve illumination)

12

Switch off ignition

13

Correct the fluid level in the windshield washer system reservoir

MODEL 203, 209

AP82.35-P-8210P

MODEL 211

AP82.35-P-8210N

   Only for service with Plus package.