Check, adjust low beams

AP82.10-P-8263LA

08.03.2018

Model	213, 238
	with code 460 (Canada version)
	with code 642 (Dynamic LED headlamps, right-hand traffic)
	except code 632 (Headlamps, LED, static, right-side traffic)
Model	213, 238
	with code 494 (US version)
	with code 642 (Dynamic LED headlamps, right-hand traffic)
	except code 632 (Headlamps, LED, static, right-side traffic)

Modification notes

07.03.2018

Check for lateral adjustment of low beams removed and degree of inclination updated.

Illustration shows model 213

01	Headlamp aimer
E1	Left front lamp unit

P82.10-8083-12

Dynamic LED headlamp, SAE version, shown on model 213

E1	Left front lamp unit
E1e2	Left low beam
E1e24	Left front adaptive high beam

P82.10-8055-01

Light gradient for low beams

1	Light-dark boundary
2	Reference line for height adjustment
3	Central mark

P82.10-8425-01

Illustration shows model 213

H	Height adjusting screw

P82.10-8101-01

 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
	General information on checking/correcting headlamp adjustment		AH82.10-P-1000-01A
	Preparatory activity
1	Prepare vehicle for checking/correcting headlamp adjustment.		AP82.10-P-8260-10H
2	Set prescribed degree of inclination of 0.1 % for main headlamps on headlamp aimer (01).
	000 588 11 21 00 Adjustment device		WS82.00-P-0151B
		 Observe all regulations and specifications in the operating instructions from the headlamp aimer manufacturer. Otherwise, correct headlamp adjustment is not possible.
3	Switch on low beams.	 When testing and adjusting the low beams, make sure that the extended fog light function is not active.
4	Open hood.
	Check and, if necessary, adjust (checking and adjustment of the low beams is described at the left low beam headlamp (E1e2); use procedure for left side for right side too.)
5	Check height adjustment of left low beam (E1e2), adjust if necessary.
	000 588 11 21 00 Adjustment device		WS82.00-P-0151B
		 With a low beam light path and correct height adjustment, the horizontal light-dark boundary (1) of the left low beam headlamp (E1e2) to the left of the center mark (3) must be congruent with the reference line for the height adjustment (2) in the headlamp aimer (01). The colored area of the light-dark boundary (1) of the left low beam headlamp (E1e2) must be above the reference line for the height adjustment (2).
		If the height adjustment for the left low beam (E1e2) is correct,
		
		No further check necessary, continue with operation step 6.
		If the height adjustment for the left low beam (E1e2) is not correct,
		
		Turn the adjustment screw for the height adjustment (H) to correct the height adjustment of the left low beam headlamp (E1e2).
	Finishing activity
6	Reset switch positions to input condition.	Only if the high beam setting is not to be checked afterwards.
7	Close hood.

เอกสารที่อ้างถึง