ap8210p8260i

Check and correct the adjustment of the headlamps

ประเภท ap · หัวข้อ 82.10 · เวอร์ชัน 0101 · 2016-11-25

ใช้กับ: Model 166 as of model year 2016 Model 292

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 82 Electrical system, body › 82.10 Exterior lights — ซีรีส์ 166 · ซีรีส์ 292

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.40 Headlamp — ซีรีส์ 166 · ซีรีส์ 292

AP82.10-P-8260I

Check and correct the adjustment of the headlamps

15.11.2016

Model	166
	as of model year 2016
Model	292

Check and correct the adjustment of the headlamps

Shown: model 292 with halogen headlamp

E1	Left front lamp unit
E1e1	Left high beam
E1e2	Left low beam

P82.10-7983-01

Check and correct the adjustment of the headlamps

Shown: model 292 with dynamic LED headlamp

E1	Left front lamp unit
E1e1	Left high beam
E1e15	Left low beam (short range)
E1e16	Left low beam (long range)

P82.10-7982-01

Check and correct the adjustment of the headlamps

Shown: Model 292

01	Headlamp aimer

P82.10-7968-01

 Danger !	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
	General information on checking/correcting headlamp adjustment		AH82.10-P-1000-01A
	Check
1	Check low beam setting; adjust if necessary	Halogen headlamp ECE version	AP82.10-P-8263EA
		Halogen headlamp SAE version	AP82.10-P-8263DA
		Dynamic LED headlamps, ECE version	AP82.10-P-8263P
		Dynamic LED headlamps, SAE version	AP82.10-P-8263BA
		 Before the low beams are checked and adjusted, all operation steps listed in the linked description must be performed carefully. Otherwise it cannot be guaranteed that the headlamps concerned are correctly set, which can then jeopardize the road safety of the vehicle.
2	Switch on high beam	On vehicles with active high beams assistant
		
		Have a second person actuate the headlamp flasher in order to activate the high beams.
3	Check setting of high beam		AP82.10-P-8260-02F
		 The high beams are adjusted when the corresponding low beam headlamp is adjusted; the high beams cannot be adjusted separately. Position the headlamp aimer (01) in front of the left high beams (E1e1). Carry out the same procedure for the right side.
		If the high beam setting is not OK.
		
		Rectify the problem subject to a separate repair order.
4	Reset switch positions to input condition

เอกสารที่อ้างถึง