Check setting of high beam

AP82.10-P-8260-02F

Check setting of high beam

Model

166

as of model year 2016

Model

292

Shown: model 292 with ECE version of headlamp

01

Headlamp aimer

1

Central mark

H

Adjustment screw

S

Adjustment screw

Shown: model 292 with halogen headlamp

E1

Left front lamp unit

E1e1

Left high beam

E1e2

Left low beam

Shown: model 292 with dynamic LED headlamp

E1

Left front lamp unit

E1e1

Left high beam

E1e15

Left low beam (short range)

E1e16

Left low beam (long range)

1

Align headlamp aimer (01) parallel to vehicle, level with left high beam (E1e1) or right high beam.

2

Check setting of high beam.

 Corrections must not be made to the adjustment screws (H, S) on the headlamp.
Otherwise, the previously adjusted low beams will be mis-adjusted.

 The center of the light beam must be positioned on the central mark (1) in the headlamp aimer (01).

If headlamp adjustment is not correct.



Rectify problem subject to separate repair order.