ap5430p5451d

Check warning and function indicator lamps in instrument cluster

ประเภท ap · หัวข้อ 54.30 · เวอร์ชัน 0100 · 2019-05-22

ใช้กับ: Model 293

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 54 Electrical system, equipment and instruments › 54.30 Instrument cluster, display instruments, hazard warning device — ซีรีส์ 293

EinPAS 31 Communication/information/entertainment › 31.30 Instrument cluster/onboard computer › 31.30.11 Control unit/relay — ซีรีส์ 293

EinPAS 31 Communication/information/entertainment › 31.30 Instrument cluster/onboard computer › 31.30.15 Indicator/display — ซีรีส์ 293

AP54.30-P-5451D

Check warning and function indicator lamps in instrument cluster

11.04.2019

Model

293

Check warning and function indicator lamps in instrument cluster

1

Left turn signal indicator light

2

Right turn signal indicator light

3

High beam indicator lamp

4

Low beam indicator lamp

5

Rear fog lamp indicator lamp

6

Standing lamps indicator lamp

7

Brake fluid and parking brake warning lamp

8

Anti-lock braking system indicator lamp

9

Brake system warning lamp

10

Parking brake indicator lamp

11

ESP®/ESP® OFF warning lamp

12

Parking brake indicator lamp

13

Seat belt warning lamp

14

Supplemental restraint system indicator lamp

15

DISTRONIC warning lamp (with code (233) DISTRONIC PLUS or code (266) DISTRONIC PLUS with Steer Assist and Stop & Go Pilot or code (239) DISTRONIC PLUS or code (258) COLLISION PREVENTION ASSIST)

16

Engine diagnosis indicator lamp

17

Battery reserve warning lamp

18

Front fog lamps indicator lamp

19

Power steering warning lamp

20

Tire pressure monitor warning lamp (with code (475) Tire pressure monitor)

21

Lamp failure message on the multifunction display

22

Lamp indicating limited propulsion power of EV drivetrain

23

High-voltage system error warning lamp

P54.30-A021-81

Preparatory activity

1

Close the engine hood, the liftgate and all doors.

2

Switch electronic ignition lock control unit to position "2" (circuit 15).

3

Operate parking brake.

Check

4

Check warning lamps (7, 9, 10, 11, 13, 15, 17, 19, 20, 23) and indicator lamps (6, 8, 12, 14, 16, 18, 22) for proper operation.

If problems are determined,

rectify the problems.

After obtaining special order.

5

Manually switch on low beam.

The low beams indicator lamp (4) must light up and there must be no lamp failure message shown on the multifunction display (21).

If problems are determined,

rectify the problems.

After obtaining special order.

6

Switch on main beam.

The high beams indicator lamp (3) must light up and there must be no lamp failure message shown on the multifunction display (21).

If problems are determined,

rectify the problems.

After obtaining special order.

7

Switch on rear fog light.

The rear fog light indicator lamp (5) must light up and there must be no lamp failure message shown on the multifunction display (21).

If problems are determined,

rectify the problems.

After obtaining special order.

8

Operate service brake and engage reverse gear.

There must be no lamp failure message shown on the multifunction display (21).

If problems are determined,

rectify the problems.

After obtaining special order.

9

Switch on hazard warning system.

The left turn signal light indicator lamp (1) and the right turn signal light indicator lamp (2) flash at the same time on the multifunction display. There must be no lamp failure message shown on the multifunction display (21).

If problems are determined,

rectify the problems.

After obtaining special order.

10

Reset switch positions to input condition.

Finishing activity

11

Switch electronic ignition lock control unit to position "0".