AP47.20-W-0730B | Clean filter element of fuel prefilter | 5.4.11 |
ENGINE 900.9 in MODEL 375.1, 970, 972, 975, 976
ENGINE 902.9 in MODEL 375.15, 970, 972, 974, 975, 976
ENGINE 902.9 in MODEL 375.3
ENGINE 902.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5
ENGINE 902.9 in MODEL 957.5 /6 except CODE (MS8) Natural gas engine
ENGINE 904.9 in MODEL 375.1, 970, 972, 975, 976
ENGINE 906.9 in MODEL 970, 972, 974, 975, 976
ENGINE 906.9 in MODEL 374.5, 375.3, 950.5 /6, 952.5, 953.6, 954.5
ENGINE 906.9 in MODEL 952.6, 957.5 /6 except CODE (MS8) Natural gas engine
ENGINE 924.9 in MODEL 970, 972, 974, 975, 976
ENGINE 925.9 in MODEL 970, 972, 974
ENGINE 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957.382 /5 /6
N07.57-0224-01
1 Threaded cap
2 Sealing ring
3 Filter element
4 Filter housing
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
1 | Open lid on fuel tank | Open cover to enable the overpressure in the fuel tank to be evacuated. | |
2 | Clean exterior of filter housing (4) | ||
3 | Unscrew screw cap (1) and pull out of filter housing (4) together with filter element (3) | Ensure that no foreign bodies enter the filter housing (4). Do not wipe the filter housing (4) under any circumstances. | |
Wrench socket gotis://G_58.3_06.0 | |||
4 | Clean screw cap (1) and filter element (3) | Replace filter element (3) if severely soiled or damaged. | |
5 | Replace seal (2) | Lightly grease or oil the sealing ring (2). | |
6 | Screw on screw cap (1) with filter element (3) and tighten | | |
Wrench socket gotis://G_58.3_06.0 | |||
7 | Start the engine and bleed the fuel system | Run the engine for approx. 1 minute. The fuel system is bled automatically. | |
8 | Check leaktightness of filter housing (4) when the engine is running |
Fuel filter
Number | Designation | Engine | Engine | |
BA47.20-N-1003-02A | Cover to fuel prefilter housing | Nm | 25 | 25 |
Fuel filter